- This event has passed.
Construction Equipment Liquidation Auction
Saturday Nov 3, 2018 10:00 am6:00 pm
Construction Equipment Auction
Saturday – November 3, 2018 – 10AM
Chris Hendren & Wes Ogle, Owners
Auction Location: 1100 E. Highland Ave. ● Nevada, MO
Directions: From US-71/I-49 & US-54 in Nevada, MO travel north on US-71/I-49 approx. 1¼ mi. to Exit 103. Take the exit and turn east then immediately south and travel approx. ¼ mi. to E. Highland Ave. Turn east on E. Highland Ave. and travel approx. ¼ mi. to the auction on the south side of the road. Watch for Diamond S “Auction Today” signs!
Auctioneer’s Note: Chris Hendren and Wes Ogle have been builders and general contractors in the Nevada and surrounding areas for several years. During that time, they have amassed a very large equipment and tool inventory as they have purchased many items for specific jobs and used them only a few times. As a result, their inventory has become difficult to manage and is taking up valuable storage space. Therefore, Chris and Wes have decided to sell-down some of their inventory and update other pieces. This auction features quality from start to finish! All equipment has received excellent maintenance and is in very good condition!
Additional Note: This is simply and inventory reduction. Buildet, LLC looks forward to serving their clients for many, many more years to come!
Bobcat Skidsteer w/ Grader & Trimble GPS
307 S. Clay St. ● Nevada, MO
This Parcel of Real Estate Will Be Sold At The Property At 5:30pm
Directions: From the Nevada Square travel south on S. Main St. 1 block to W. Austin Blvd. Turn west on W. Austin Blvd. and travel 3 blocks to S. Clay St. Turn south on S. Clay St and travel 1½ blocks to the property on the east side of the road. Watch for Diamond S Auction & Real Estate Co Signs
- 40×153 Lot
- 832 ft2 2-Bedroom 1-Bath Fixer-Upper Gas Furnace, Central AC
- Gutted & Ready For Renovation
- Hardwood Floors
- Enclosed Back Porch
- Nevada R-5 Schools
- Est. Taxes: $270.98
- Atlas-Copco Dynapac CA1500 Vibratory Roller, Cummins QSB3.3 Dsl, 5½’ Smooth Roller w/ Sheep’s Foot Attachment, 710 hrs, Swivel Operator Station, Runs & Operates Well!
- Bobcat T770 Skid Steer Loader, 227 hrs, Cab w/ Heat & AC, Power Bobtach, Trimble GPS System, 2-Speed, Hi-Flow Hyd, Like New & Very Nice!
- Bobcat 108 Grader Attachment, Front Wheels, Multi Angle Hyd. Adjust, Trimble Guided GPS System, Like New!
- ‘13 Bobcat S650 Skid Steer, 921 hrs, Foam-Filled Tires, Cab w/ Heat & AC
- ‘06 Bobcat 331 Mini Excavator 20” Bucket w/ Thumb, 1934 hrs, Runs Well, New Tracks, Reversible Controls!
- 16” & 12” Bobcat Mini Excavator Buckets
- ‘05 John Deere 310SG Backhoe, 4×4, Extend-A-Hoe, Plumbed For Hyd. Attachments, Foam Filled Front Tires, Front Weights – Nice!
- ‘99 Genie Z34/22 Tele-Boom Lift, 3023 hrs, 4×4, Kubota WG750LP-2 Propane or Gas Motor, 34’ Vert Height Cap, 22’ Horizontal Reach Cap
- ‘01 New Holland LS170 “Super Boom” Skid Steer Loader, 1873 hrs, Turbo, Aux. Hyd.
- 7½’ Snowplow Unit & Truck Harness (Removal of Harness Required)
- Case 9’ Skid Steer Snow Plow
- Kent Mfg. KHB3G Skid Steer Jackhammer Attachment
- Quick Attach Mfg. Skid Steer Power Broom w/ Water Attachments Like New!
- Sheyenne Tooling & Mfg. Hyd. Tele-Boom 200 w/ Sheet Material Grapple
- Skyjack SJIII 4626 26’ Scissor Lift
- Bush Hog “Razorback” 5’ 3pt. Rotary Cutter
- Buyers Broadcast Salt Spreader
- Cascade Forklift Fork Extender Unit
- Farmstar 250 Cyclones Seeder, Ex. Cond, No PTO Shaft
- Forklift Forks
- Home Built Skid Steer Grapple Attachment
- Set of Steel Skid Steer Tracks
- Skid Steer Bucket
- L-Shaped 95 gal. Dsl. Tank
- International DT466 Dump Truck, Twin Screw, Allison Auto Trans, Front & Rear Hyd, Air Brakes, Runs Well!
- ‘80 International S1800 Truck w/ 1600 Gallon Stainless Bulk Liquid Tank (3 Compartments: 800 gal. & (2) 400 gal, Gas V8, 5/2 Transmission, Elec. Pump & Power Retractable Hose – Nice!
- ‘06 Dodge Ram 3500 Crew Cab Dually, Big Horn Ed, 5.9L Cummins, 187K Mi. 4×4, Crew Cab, PW, PL, CD, Trailer Brakes, Runs Well!
- ‘01 Dodge 2500 Quad Cab Pick-Up, 4×4, V8 Gas, 178K Mi., Air Suspension & Fiberglass Tool Bed, Auto Trans.
- ‘98 Chevrolet 2500 Pick-Up Truck, 7.4L V8, 4×4, Auto Trans, 144K Mi, PW, PL
- ‘93 Chevrolet 3500 Pick-Up, 350 V8, 231K Mi. Auto Trans, Steel Flatbed w/ Elec/Hyd. Hoist
- 90’s GMC Vandura 3500 Box Truck, 5.7L V8, 194K mi, Walk-Through Cab, 15½’ Box Bed w/ Rear Overhead Door
- Ford 800 Semi, Single Rear Axle, 5/2 Transmission, No Motor
SUV, CAR & MOTORCYCLE
- Harley Davidson “Nightster” 1200cc Screaming Eagle Motor; Vance Hines Exhaust; 25K Mi; Looks, Runs & Rides Great!
- ‘06 Chevrolet Suburban LT, V8, 243K mi, 4×4, Heated Leather Seats, All Power, Rear Entertainment Sys, Brand New Tires
- ‘04 Pontiac Grand Prix GT, 3.8L V6, 191K mi, PW, PL
- Doolittle “Master Dump” 7212-M, 12’ Tandem Axle Dump Trailer, Elec/Hyd. Pump, Wooden Side Ext. & Roll Tarp
- ‘06 Doolittle 8’x20’ Tandem Axle Cargo Trailer
- Atlas Mfg. 8’x20’ Cargo Trailer, Rear Ramp Door, Side Door
- Cargo Master 7’x18’ Cargo Trailer Double Rear Doors, Side Door
- Doolittle 6’x12’, Single Axle Cargo Trailer, Double Rear Doors
- 22’ Tandem Axle Equip. Trailer, Fold-Up Ramps & Dove, Steel Tread Plate Floor, Pintle Hitch (2) 7K lb. Axles
- ‘06 Kodiak 18’ Tandem Axle Equipment Trailer, Ramps
- Home Built Plywood Cargo Trailer
CONCRETE TOOLS & EQUIPMENT
- Soff-Cut 150 Walk Behind Concrete Saw, 4.5HP Subaru
- Edco 18” Walk Behind Wet Saw, Honda GX390
- LR Tools “Power Pole” Finisher, Honda 4-Stroke GS25 w/ Extra Blades & Weights
- Honda 4-Stroke 12’ Power Screed
- Stow 6½HP Power Tamper
- Whiteman Mfg. 5½HP Power Trowel
- Multi-Quip 8HP Power Trowel
- Target Mini Con II Walk-Behind Concrete Saw, Needs New Motor
- (110) 2’x6’ Concrete Forms
- (12) 2‘x4‘ Concrete Forms
- 4”-18” Concrete Form Fillers
- (58) 6” Steel Flat-Work Forms
- (55) 4” Steel Flat-Work Forms
- Inside & Outside Form Corners
- (100+) 4½’ Sticks of ⅝” Rebar
- Rebar Cutter
- 1”x & 2”x Form Boards
- Concrete Blankets
- Bull Float w/ Extension Poles
- Concrete Wire Matts
- Expansion Joint Material
- Floor & Wall Ties, Waler Brackets & Snap Ties
- Lot of Masonry Screen
JOBSITE TOOLS & SHOP ITEMS
- Tons of Misc. Power Tools Far To Extensive To List!
- Very Lg. Selection of 19.2V Drills/Tools (Craftsman & Other Makes)
- Very Lg. Selection of Bostitch Pneumatic Framing Nail Guns
- Very Lg. Selection of Bostitch & Other Pneumatic Finish Nail Guns
- Bostitch Elec. “Wheel Barrow” Air Comp.
- Bosch Brute Elec. Jackhammer
- Hitachi 2HP Compact Air Comp.
- Ingersoll Rand SS3 “Wheelbarrow” Air Comp, Honda GX Gas Motor
- Lift-Right Ergo 3000 HD Pallet Jack
- Dozen Air Lift Units for Shop Rail Hoists (Various Sizes)
- Delta Floor Model Drill Press
- (3) DeWalt Worm Drive Circular Saws
- (2) DeWalt 12” Sliding Compound Miter Saws w/ Collapsible Rolling Stands
- (2) DeWalt Contractor Saws
- DeWalt 10” Compound Miter Saw
- DeWalt 18V Laser Level w/ Case
- DeWalt Angle Grinders
- DeWalt Compact Air Comp.
- DeWalt Hammer Drills
- DeWalt Impact Driver
- DeWalt Jobsite Radio
- DeWalt Pad Sanders
- DeWalt Plunge Router
- DeWalt Screw Guns
- (2) Paslode Impulse Cordless Power Fastener Units Gas/Battery
- (2) Proctor 16’ Wall Jacks
- B&D Poly Work Stand
- B&D Zip Saw
- Rigid Scroll Saw
- Pacific 3” Trash Pump, New!
- Pacific 5500W, 418cc Dsl, Generator, Elec. Start
- Pro Series 7,000W Dsl. Generator, Low Hrs, Elec. Start
- Sportsman 13HP 7000W Gas Generator, Elec. Start
- (100±) 7¼” Circular Saw Blades
- (2) A-Frame Rolling Material Racks
- (2) Air-Driven Water Pumps & Hoses
- (2) Collapsible Miter Saw Stands w/ Wheels
- (2) Flammable Materials Cabinets
- (3) 11’ Pallet Racking Uprights
- (3) 12’ Pallet Racking Uprights
- (8) 14½’ Pallet Racking Uprights
- 8’ HD Rolling Shop Work Table/Cart
- Air Hoses & Extension Cords
- Air Line Dryer/Regulator
- Work Stand
- Wet Grinders/Finishers (Counter Tops)
- Ladder Stand-Off’s
- Line of Hyd. Fittings
- Selection of Various Material & Shop Carts & Racks
- Supply of Safety Harness & OSHA Equip.
- Metro-Tel Cable Locator Unit
- Reddy Heater Multi-Fuel Tube Style Heater
- Rehau Pex Fitting Tool
- Roller Material Tables
- Schultz Poly Bulk Liquid Pallet Tank
- FG Ladders
- Werner 2512 12’ Alum. Walk Board
- Shingle Shovels
- Wall Texture Hopper Gun
- Comfort Aire Window/Wall AC Unit w/ Dehumidifier 220V, Digital Control
- Onyx Mfg. 8’ 1-Piece Solid Surface Double Sink/Counter
- Onyx Mfg. Mfg. Solid Surface Shower Base, New!
- Onyx Mfg. Solid Surface 1-Piece Sink w/ Vanity Stand
- (10) 32” Channel Drains
- (30±) 21½’ Sheets of Used Blue Barn Metal w/ Corners & Misc Trim Pcs. (Removed From 40×60 Barn)
- (4) Pallets of Stone Pavers
- (4) Rolls of Used Chain-Link Fencing
- (5) 300’ Rolls of Pex (For Heated Floors)
- (8) Boxes of Alside & Rollex Trim Coil
- Flashing, Insulation, Insulation Board, Misc. Tile, Tile Backer, Sheet Rock, Soffit & Other Building Misc. Building Materials
- HD Plumbing Valves & Fittings
- Lot of Assorted PVC Pipe
- New 2’x2’ Acoustical Ceiling Tile, Lights & Drop Ceiling Supplies
- Pallet of Retaining Wall Block & Other Misc. Block
- Pallet of Silt Fencing
- Roof Accessory Pcs. (Drip Edge, Vents, Etc.)
- Cases of Nails & Hardware
- Interior & Exterior Doors
- Selection of Shingles (Various Styles & Colors)
COMMERCIAL RACK OVEN & MISCELLANEOUS
- Lucks Mfg. RM30G Stainless Industrial Foodservice Rack-Oven, Digital Temp Control, Nat. Gas
- (4) Stainless Cooking Racks for Commercial Rack Oven
- (45±) Black Metal & Micro Suede Upholstered Dining Chairs (NIB & Unassembled)
- (5) 4-Drawer Filing Cabinets
- ‘06 Dodge Cold Air Intake
- 335 gal. Propane Tank (Great for BBQ Smoker)
- Automotive AC Kit